Выбор по параметрам: Розничная цена
  • I/O Complement
  • Analog Line Inputs 16
  • Analog Line Outputs 16
  • Analog Monitor Outputs Two (one stereo pair)
  • AES/EBU One stereo input, one stereo output
  • FireWire 800 (IEEE 1394b) Dual ports
  • Thunderbolt (via Thunderbolt Option Card) Dual ports
  • Word Clock One input, one output
  • MADI Optical Ports One input, one output
  • A/D – D/A Conversion
  • Supported Sample Rates (kHz) 44.1, 48, 88.2, 96, 176.4, 192
  • A/D Bits Per Sample 24
  • Simultaneous A/D conversion 16 channels
  • Simultaneous D/A conversion 18 channels
  • Analog Round-Trip Latency 1.1 milliseconds @ 96 kHz sample rate
  • Analog Round-Trip Latency with up to four serial UAD Powered Plug-Ins via Console application 1.1 milliseconds @ 96 kHz sample rate
  • Analog I/O
  • Analog Inputs 1 – 16
  • Dynamic Range 119.25 dB (A–weighting)
  • Signal-to-Noise Ratio 119.25 dB (A–weighting)
  • Total Harmonic Distortion + Noise -112 dB @ -1 dBFS
  • Common-Mode Rejection Ratio -75 dB
  • Frequency Response 20 Hz – 20 kHz, ±0.05 dB
  • Channel Separation (Crosstalk) -138 dB
  • Input Impedance 10 Kilohms
  • Gain Settings +4 dBu or -10 dBV (reference level is selectable in pairs)
  • Max Input Voltage (Reference Level @ +4 dBu, Balanced) 20.22 dBu
  • (18 dBV, 7.94 VRMS, 0 dBFS)
  • Max Input Voltage (Reference Level @ -10 dBV, Balanced) 14.22 dBu
  • (12 dBV, 3.98 VRMS, 0 dBFS)
  • Max Input Voltage (Reference Level @ -10 dBV, Single-Ended) 8.22 dBu
  • (6 dBV, 2 VRMS, 0 dBFS)
  • Stereo Level Balance ±0.01 dB
  • Connector Type Two Female DB25, Tascam wiring
  • Analog Outputs 1 – 16
  • Dynamic Range 118.5 dB (A–weighting)
  • Signal-to-Noise Ratio 118.2 dB (A–weighting)
  • Total Harmonic Distortion + Noise -107.5 dB @ -1 dBFS
  • Connector Type Two Female DB25, Tascam wiring
  • Monitor Outputs 1 – 2
  • Dynamic Range 115 dB (A–weighting)
  • Signal-to-Noise Ratio 115 dB (A–weighting)
  • Total Harmonic Distortion + Noise -105.5 dB @ -1 dBFS
  • Gain Range (Monitor Knob) -INF to 0 dBFS
  • Connector Type Two Male Balanced XLR (pin 2 hot)
  • All Analog Outputs
  • Frequency Response 20 Hz – 20 kHz, ±0.05 dB
  • Channel Separation (Crosstalk) -120 dB
  • Output Impedance 600 Ohms
  • Stereo Level Balance ±0.01 dB
  • Gain Settings +4 dBu or -10 dBV (reference level is selectable in pairs)
  • Max Output Voltage (Reference Level @ +4 dBu, Balanced) 20.22 dBu
  • (18 dBV, 7.94 VRMS, 0 dBFS)
  • Max Output Voltage (Reference Level @ -10 dBV, Balanced) 14.22 dBu
  • (12 dBV, 3.98 VRMS, 0 dBFS)
  • Max Output Voltage (Reference Level @ -10 dBV, Single-Ended) 8.22 dBu
  • (6 dBV, 2 VRMS, 0 dBFS)
  • Digital I/O
  • AES/EBU
  • Connector Type XLR
  • Format IEC 60958 Type I
  • MADI
  • Connector Type Dual Optical SC-Plug (ISO/IEC 9314-3)
  • Format AES10
  • Supported Modes @ Sample Rates of 88.2 kHz and Higher Standard, Legacy
  • Word Clock
  • Connector Type BNC
  • Lock Range ±0.5% of any supported sample rate
  • Word Clock Input Termination 75 Ohms, switchable
  • Synchronization Sources
  • Internal, Word Clock, AES/EBU
  • Electrical
  • Power Supplies External AC to DC Power Supply Brick (Internal DC to DC Power Supply)
  • AC Connector Type IEC Male
  • AC Requirements 100V – 240V AC, 50 – 60 Hz
  • DC Connector Type XLR 4-Pin Locking Male (Neutrik P/N NC4MDM3-H)
  • DC Requirements 12 VDC, ±5%
  • Maximum Power Consumption 40 Watts (55 Watts when bus powering external Thunderbolt peripheral)
  • Mechanical
  • Dimensions
  • Width 19”
  • Height 1.75” (1U rack space)
  • Depth, Chassis Only 12.125”
  • Depth, Including Knob & Jack Protrusions 13.75”
  • Shipping Box (Width x Depth x Height) 24” x 17” x 8”
  • Weight
  • Shipping Weight (with box & accessories) 18 pounds
  • Weight (bare unit) 8.7 pounds
  • Package Contents
  • Apollo 16 Audio Interface
  • External Power Supply
  • Apollo 16 Hardware Manual
  • 15’ FireWire 800 cable
  • (2) IEC AC Power Cables (USA & Europe)
  • Set of (4) Rack-Mount Screws
  • Universal Audio Product Catalog
Пока еще никто не оставлял отзывов
Загрузка...